Silverpint Cyanotype Art And Science Kit 3.9 LSKU16236

  • Cost:

    • £43.78 inc VAT
    • £36.48 + £7.30 VAT

Silverpint Cyanotype Art and Science Kit Gallon

  • eight ounces green (Ferric Ammonium Citrate)
  • four ounce red (Potassium Ferricyanide)
  • 1 gallon mixing can with lid
  • one UV light safe bag
  • one mixing spoon
  • one brush
  • one washer(to open can)
  • one pair of gloves
  • one mask
  • one MSDS (material safety and data sheet)
  • one detailed instruction - makes a gallon of cyanotype chemistry solution which can produce (800) sheets of 8 x 10 watercolor paper or (48) square yards(36") of fabric
     

How To Use:

Set-up a mixing area using news papers or drop cloths in a low light area.
Mix dry compounds (green & red) with two cups hot water in 1 quart mixing can - add the dry compounds into the quart mixing can and then add two cups hot water (100 degrees or better - the hot water helps dissolve the dry compounds) and stir with mixing spoon.
Brush cyanotype solution on to watercolor paper and/or other 100% natural fabrics i.e., cotton, silk, rayon, linen, etc. - and let dry in a cool dark location - you can also use a hair dryer to speed-up the drying process.
Place design on treated material - for best results, if printing a transparency, use a clip frame to hold in place your design.
Expose to UV light - sun or UV lamp.
Rinse you cyanotype print with water until the water is clear - about 1 minute or so - take care not to over saturate the print and risk tearing it.
 

Care Instructions:

Dry compounds last a year.
Mixed solution last one week - if can is sealed.
Use label on can cover to date your materials.

Silverpint Cyanotype Art And Science Kit 3.9 L
  • 1
Quantity

Contact Us

spread the word

Back to top